HOME HOME FLOORING FLOORING WALL CLADDING WALL CLADDING WALL PROTECTION WALL PROTECTION LED PANEL LED PANEL FURNITURE FURNITURE CEILING CEILING NEW PRODUCT NEW PRODUCT FACADE  FACADE CONTACT CONTACT
SARGRUP İNŞAAT VE ENERJİ LTD.ŞTİ.       T: +90 212 418 45 35     E: info@sargrup.com.tr
WALL GUARDS HANDRAILS CORNER GUARDS CATALOG
WALL PROTECTION
MEDICLAD
WALL GUARDS
The wall protection models are very strong ornamental protection, made of aluminium and Zikonyl ®. They allow the impacts to be absorbed that are habitually received by the walls. These protection models are designed so that when receiving the impact, the Zikonyl ® avoids to damage the wall, and immediately recovers their original shapes and sizes. The end cap are injected, in polyamide conditioned to take maximum advantage of their excellent properties. All the models and products of Zikonyl ® are very easy to mount, which means mounting times can be reduced.
SAR 
Preparation : The walls into which the section is to be mounted should be finished and painted. For better fitting, cut the profile Zikonyl ® 2mm. longer than aluminum. The end bits are valid for both the right and left of the profile and have to be mounted before the profile Zikonyl ®.
ZK-Z model
ZK-D model
Their 200mm width protects the wall from objects that are located at different heights. Mounting : we must cut and drill the aluminum sections depending on the necessary measures by calculating a separation between fasteners 600 to 1000mm.aprox. The minimum installation measure of ZK-Z model is 101mm.
Their 40mm width protects the wall from objects that are located at different heights. Mounting : we must cut and drill the aluminum sections depending on the necessary measures by calculating a separation between fasteners 600 to 1000mm.aprox. The minimum installation measure of ZK-D model is 140mm.
ZK-Y model
ZK-H model
ZK-N model
ZK-T model
This is a very resistant decorative protection, composed of a protective Zikonyl and instead of aluminum, has an inner profile run the entire length of plastic, which allows to absorb the shocks usually receive the walls. This model is designed for use in nursing homes, hospitals advised to use the ZK-Z model, since a hospital bed with a patient can weigh 500 kg, while in a residential center or mentally handicapped, the are moving wheelchair with approximate weight of 200kg. As the width of 200mm., You can protect objects that are located at different heights, absorbing the impact and then recover its original shape and size. This model is more economical than the ZK-Z but without sacrificing its effectiveness, and that by bringing the inner profile run the entire length is more robust than if you just take the aluminum into pieces. Our company refuse to make this model, since despite the fact that their manufacture is more economical, because it carries lower amount of aluminum, the resistance of this model against shocks is lower, there are zones where doesn't have aluminum so practically there are no absorption of impacts. In addition, the visual effect provided by the aluminum pieces placed far from satisfactory, since the profile will observe a series of undulations, caused by the pressure of the coating. The only way to eliminate the waves, is decreasing the pressure of the coating. Doing so voids the lateral resistance to impact, when impact with a bed in a corridor profile use to be laterally. Which has been discarded due to the shape of hide 'pressure waves' which produces in the coating, is reducing the pressure thereof, in which case the robustness and effectiveness of the protector is clearly reduced.
Preparation : The walls into which the section is to be mounted should be finished and painted. Mounting : we must cut and drill the Zikonyl ® sections depending on the necessary measures by calculating for a space of approximately 600 to 1000 mm. between fasteners. For better fitting, cut the profile Zikonyl ® 2mm. longer than interior plastic. The end bits are valid for both the right and left of the profile and have to be mounted before the profile Zikonyl ®.
ZK-805 model
The ZK-805 model is a very strong ornamental protection, made of aluminium and Zikonyl ®. The flat profile is a horizontal walls protector, made of plastic with high impact resistance. Anchored to the wall using silicone neutral or adhesive. Her measurements in stock are 235mm wide and 2 mm thick and 5 meters long. Textured outer surface and smooth interior. Preparation : The walls into which the section is to be mounted should be finished and painted. Mounting : Cut the Zikonyl ® in the necessary measures. Then make sure that both the profile on its smooth face as the wall are clean of dust and impurities, this step is vital because not be completely clean surface ZK-F will not be properly attached to the wall .
Their 100mm width protects the wall from objects that are located at different heights. Mounting : we must cut and drill the aluminum sections depending on the necessary measures by calculating a space of approximately 500 to 600mm between separating blocks (Ref. ZK301). The minimum installation measure of ZK-Y model is 111mm.
Their 100mm width protects the wall from objects that are located at different heights. Mounting : we must cut and drill the aluminum sections depending on the necessary measures by calculating a space of approximately 500 to 600mm. Between separating blocks (Ref. ZK301). The minimum installation measure of ZK-H model is 151mm.
Their 90mm width protects the wall from objects that are located at different heights. Mounting : we must cut and drill the aluminum sections depending on the necessary measures by calculating for a space of approximately 600 to 1000 mm. between fasteners. The minimum installation measure of ZK-N model is 101mm.
WALL PROTECTION WALL PROTECTION WALL GUARDS WALL GUARDS